JPFCP-2EZ

JP Drop-in .169" Colt Large pin AR fire control kit including speed hammer, oversize anti-walk pins and adjustable/reversible selector.

IMPORTANT:

Read the JPFC-2EZ Compatibility Notice and make sure that your lower is compatible with the JPFCP-2EZ kit.

Spring selection:

Make sure that you indicate your spring set choice in the "Special instructions/comments" field when you check out.

• Standard
  The standard spring sets included in all JP Fire Control kits include the yellow hammer and trigger springs, which may be used for competition and recreational applications with hand loads or domestic made non-military ammunition. The yellow/yellow combination results in a release weight in the 3.0-3.5 lb range on most receivers. Also included Is the red hammer spring for use with military (5.56 NATO) or foreign manufactured ammo with low sensitivity primers. The red hammer spring MUST be used on any tactical duty (LE) installations and any AR-10 type installation for 100% ignition reliability. The yellow/red combination results in a release weight of 3.5-4.0 lbs on most receivers.
• Tactical
  The tactical spring set includes a full powers (grey) hammer spring and yellow trigger spring. It may be required for agencies that specify a trigger release weight of over 4 lbs mandatory. This set up also insures 100% ignition reliability on both AR-15 and AR-10 type rifles.
• CMP
  To meet NRA Service Rifle Competition rules of a 4.5 lb release weight, order the CMP spring set up which includes the full power grey hammer spring and a custom trigger return spring (also grey) which will allow you to tune to a release weight just over 4.5 pounds to lift the NRA weights.